Technical Parameters of Allen-Bradley 2198-C4020-ERS
Model: 2198-C4020-ERS
Product Type: Single-axis Servo Drive
Voltage Class: 400V Class
Rated Input Voltage: 480V AC
Input Phase: 3-phase
Continuous Output Power: 3.9 kW
Continuous Output Current: 7.3 A
Peak Output Current: 23.8 A
Network: EtherNet/IP
Ethernet: Dual Ports

2198-C4020-ERS Product Introduction
The Allen‑Bradley 2198-C4020-ERS is a 400V single-axis servo drive from Rockwell Kinetix 5300 series. Frame 2, rated 3.9kW for medium-heavy load axes.
It uses 480V three-phase power with 342–528V input range, compatible with local 380V industrial power. 7.3A continuous current and 23.8A peak current, ideal for frequent start-stop and high-inertia loads.
It has dual-port EtherNet/IP with DLR, and works with Logix controllers. Hardwired STO is standard, no extra safety relay needed. DIN rail mounted, natural cooling, commissioned via Studio 5000.

What problems can this servo drive solve?
The 2198-C4020-ERS is more than a motor driver. It suits automation equipment requiring stable motion and network control.
Suitable for:
Repeated precise positioning
Frequent start-stop & high acceleration torque
High speed and multi-axis synchronization
EtherNet/IP control
Unified programming with Logix PLC
Direct access to servo status and diagnostics

Installation & Cooling Recommendations
The 2198-C4020-ERS uses natural air cooling. Proper cabinet layout ensures stable operation and longer service life:
1.Clearance: ≥10mm side gap for side-by-side mounting; ≥60mm vertical gap when stacked to avoid heat buildup
2.Cabinet layout: Mount on upper-middle section, not above heat sources like transformers or braking resistors. Power terminals face down for easier wiring and less dust accumulation.
3.Heat management: Install exhaust fans if cabinet temperature stays above 40℃. For densely packed drives, use cabinet air conditioner to keep temperature under 50℃.
4.Maintenance space: Reserve ≥120mm in front for wiring and inspection. Leave room at the bottom to prevent sharp bends on power cables.
Quantity available: In stock.
01
Warranty: 12 months.
02
Lead time: Shipment within 3-5 working days.
03
Terms of payment: T/T. RMB (CNY) support.
04
Courier partners: FedEx, DHL, UPS, TNT, EMS, SF express.
05
FAQ
Q1: Does 2198-C4020-ERS support single-phase input?
A1: No. This is a 400V class servo drive designed for three-phase power only. It accepts 342–528V three-phase AC input. If single-phase power is required, choose 200V class models from the same series.
Q2: What are the rated power and peak current of this drive?
A2: At 480V three-phase input, the continuous output power is 3.9kW, continuous output current is 7.2A rms, and peak output current reaches 24A rms. It supports more than 3 times short-time overload to meet frequent acceleration and deceleration.
Q3: Can it connect directly to China's 380V three-phase industrial power supply?
A3: Yes. Its input voltage range is 342–528V. It works directly with standard 380V three-phase industrial power in China without extra transformers.
Q4: How can I place an order or apply for bulk purchase discounts?
A4: Send your required order quantity via email to Irene8866@163.com, or leave us a message on WhatsApp (+86 18950163907). We will reply within 24 hours with formal quotation and stock confirmation.
For more product information, please contact our professional sales team to obtain the latest pricing and stock information for the Allen-Bradley 2198-C4020-ERS!
Hot Tags: allen-bradley 2198-c4020-ers kinetix 5300 3.9kw servo drive, China allen-bradley 2198-c4020-ers kinetix 5300 3.9kw servo drive manufacturers, suppliers, factory




