BECKHOFF I/O Modules

BECKHOFF I/O Modules for Industrial Automation Systems

We supply BECKHOFF I/O modules and EtherCAT terminal components across digital input and output, analog signal processing, encoder interfaces, power supply, electronic protection, and motion control. Our listed models include EL4124, EL2809, EL1819, EL5042, EL9227-5500, and EL7201-0010.

For new equipment, system expansion, or spare parts replacement, we support model-based sourcing and check product availability against the requested part numbers.

 
First 12345 Last
 

BECKHOFF I/O Module Models and Functions

Our product range covers the following functional groups and model references.

Product Category Model Examples Function
Digital Input Terminals EL1819, EL1808, EL1008, EL1002 Digital signal acquisition
Digital Output Terminals EL2809, EL2872, EL2024, EL2022 Digital signal output
Analog Output Terminals EL4124, EL4114, EL4031, EL4024 Analog current and voltage output
Encoder Interface Terminals EL5042, EL5001 BiSS-C and SSI encoder interfaces
Power Supply Terminals EL9560, EL9505, EL9210 Power supply and voltage conversion
Potential Distribution Terminals EL9188, EL9189, EL9185 24V DC and 0V potential distribution
Electronic Protection Terminals EL9227-5500 Electronic overcurrent protection
Motion Control Terminals EL7201-0010 Servo motor drive

These models have different functions and electrical configurations. Availability and supply status are checked against each requested model.

Technical Specifications of Selected BECKHOFF Modules

The following specifications provide model-level selection information.

Model Technical Specifications
EL4124 4 analog output channels; 4–20 mA; 16-bit resolution; load below 350 Ω; maximum output rate 4 ksps with DC disabled
EL2809 16 digital output channels; 24V DC (-15%/+20%); maximum 0.5 A per channel; short-circuit protection
EL1819 16 digital input channels; 24V DC
EL5042 2 BiSS-C encoder channels; selectable encoder supply of 5V or 9V DC; maximum total supply current 0.5 A; maximum transmission rate 10 MHz
EL9227-5500 24V DC (-15%/+20%); 2 independent output channels; maximum combined rated current 10 A, adjustable in 1 A increments
EL9560 24V DC input (-15%/+20%); 24V DC output (-15%/+5%); output current up to 0.1 A; input/output isolation of 500V AC
EL9505 24V DC input; 5V DC ±1% output; output current 0.5 A; short-circuit protection
EL9188 16 potential distribution connections for 24V DC; maximum current load 10 A; rated voltage up to 60V; 12 mm width
EL9189 16 potential distribution connections for 0V DC; maximum current load 10 A; rated voltage up to 60V; 12 mm width
EL9185 4 × 24V DC and 4 × 0V DC distribution connections; maximum current load 10 A; rated voltage up to 230V AC/DC
EL7201-0010 External power supply 8–48V DC; rated output current 2.8 A RMS; peak output current 5.7 A RMS for 1 second

For EL9227-5500, the 10 A maximum rated current applies to both channels combined, not to each channel independently.

For EL7201-0010, 2.8 A RMS is the rated output current, while 5.7 A RMS is the peak output current for 1 second.

For EL5042, the 5V or 9V DC supply is an encoder supply option, not the module's operating voltage.

EtherCAT System and Installation Compatibility

The listed EL-series terminals are associated with the EtherCAT terminal system. Installation and configuration depend on the individual module and existing control architecture.

Model / Component Installation or Configuration Information
EL9188 35 mm DIN rail mounting; 12 mm width; IP20
EL9189 35 mm DIN rail mounting; 12 mm width; IP20
EL7201-0010 35 mm DIN rail mounting; IP20
EL5042 EtherCAT communication; configuration through CoE
EK1100 EtherCAT Bus Coupler; 2 RJ45 ports; 100 Mbit/s communication; maximum 100 m distance between stations

EK1100 is an EtherCAT Bus Coupler rather than an ordinary I/O terminal. Its inclusion in an expansion or replacement order depends on the existing system configuration.

For replacement inquiries, we check the complete model number, hardware revision, firmware version, connection requirements, and relevant control-system configuration information. Similar functions alone do not establish direct replacement compatibility.

Power Distribution and Supporting Terminals

Our listed supporting terminal components include:

Model Function
EL9188 24V DC potential distribution
EL9189 0V DC potential distribution
EL9185 Combined 24V DC and 0V DC distribution
EL9210 24V DC potential supply terminal with fuse and diagnostic functions
EL9010 E-Bus end terminal
EL9070 Shield connection terminal

These components can be included in a multi-model sourcing inquiry alongside the required I/O modules.

BECKHOFF Spare Parts Sourcing and Supply Support

We support industrial automation spare parts procurement through:

  • Single-unit and mixed-model inquiries.
  • Sourcing support for discontinued automation parts.
  • Model and nameplate verification before shipment.
  • Product condition options, subject to availability: new and factory-sealed, new and open-box, unused surplus, and refurbished or used.
  • Consolidated quotations for multi-brand automation spare parts.
  • Control cabinet assembly, wiring harness processing, and terminal assembly services.
  • Technical assistance with model identification and replacement checks.

We can provide product and nameplate photographs for pre-shipment verification. Stock status, product condition, pricing, and estimated delivery arrangements are confirmed for each order.

Request a BECKHOFF I/O Module Quotation

Send us your BECKHOFF model numbers and required quantities for an availability and quotation check.

For replacement orders, you can also send a nameplate photograph or hardware revision information. We will use the available details to check the requested model, supply status, and relevant replacement conditions.

For multi-model purchases, send your complete BOM in one inquiry so we can check the listed items together.

We're known as one of the most reliable beckhoff i/o modules manufacturers and suppliers in China. With a professional team, we are able to meet the needs of the majority of our customers. Please feel free to buy high quality beckhoff i/o modules in stock here from our factory. For price consultation, contact us.

BECKHOFF EL1904, EL1904, EP2328-0002