BECKHOFF EL4004 Technical Specifications
Model:BECKHOFF EL4004
Rated Voltage: 24 V DC
Output channels: 4 independent analog outputs
Output type: Voltage output (0–10 V)
Communication Protocol: EtherCAT
Mounting Type: Standard 35mm DIN-Rail Mounting
Resolution: 12-bit
Conversion time: ~250 μs
Electrical Isolation: 500 V
What is BECKHOFF EL4004?
BECKHOFF EL4004 is a commonly used 4-channel analog output module in EtherCAT systems, designed for 0–10 V voltage signal output. It is mainly used to control devices such as frequency converters, drives, and control valves that require continuous adjustment.It is very easy to use-just connect it to the EtherCAT network and it is ready to go, with no complicated setup required. The four channels are sufficient for most standard applications such as speed, pressure, and flow control. The module has a compact design and can be installed side by side with other Beckhoff modules, saving cabinet space. With stable signal output, fast response, and reliable long-term performance, it is a highly versatile basic control module widely used in automation projects.
Why Choose Beckhoff EL4004?
Numerous engineers prioritize the EL4004 when multiple analog outputs are required, and the reasons are straightforward.
● A single module delivers 4 analog output channels, cutting down the number of modules and saving cabinet space.
● Stable output and high control precision, maintaining reliable performance during long-term operation.
● Fast EtherCAT communication delivers prompt control response.
● Seamless compatibility with TwinCAT software for easier programming and commissioning.
● Standard DIN rail mounting enables convenient maintenance and replacement.
● Original Beckhoff module with excellent compatibility, suitable for all EtherCAT automation systems.
EL4004 Application Scenarios
The EL4004 is suitable for most EtherCAT automation projects, especially applications that require precise analog control. In motion control, it can adjust the speed and positioning of servo systems. In process control systems, when used with frequency converters and control valves, it can regulate process parameters such as flow, pressure, and temperature.Whether in centralized control cabinets or distributed remote stations, it delivers stable signal output and simplifies wiring, making it a practical analog control solution for industrial applications.
Design Highlights
Improve efficiency
● Material:The Beckhoff EL4004 inherits the consistent industrial-grade design of Beckhoff EtherCAT series. Its housing is made of sturdy engineering plastic with great impact and wear resistance, making it adaptable to harsh complex industrial environments.
● Appearance:It features an ultra-slim compact structure that takes up minimal cabinet space, ideal for high-density I/O systems. Clear LED status indicators on the front panel display real-time operating status, simplifying on-site maintenance and troubleshooting.
● Design:It adopts standard 35 mm DIN rail mounting. Users can install or replace the module quickly without special tools, greatly boosting on-site construction efficiency.
Aftersales Support
Quantity available: In stock.
01
Warranty: 12 months.
02
Lead time: Shipped the same day.
03
Terms of payment: T/T. RMB (CNY) support.
04
Courier partners: FedEx, DHL, UPS, TNT, EMS, SF express.
05
FAQ
Q1: What devices can the EL4004 control?
A1: It is an analog voltage output module mainly used to drive devices that require 0–10 V control signals, such as frequency converters, servo drives, proportional valves, control valves, data recorders, and sensor calibration equipment. It is a key component for achieving precise control in automation systems.
Q2: What is the maximum load per channel?
A2: Each output channel requires a load resistance greater than 5 kΩ to ensure proper short-circuit protection operation. This is an important parameter to consider during selection to avoid mismatched loads that could trigger protection or cause damage.
Q3: What output accuracy does the module provide?
A3: The output resolution is 12-bit, with a relative full-scale error of less than 0.1%. This level of accuracy is sufficient for most industrial control applications, enabling precise control of valve positions and motor speeds.
Q4: How can I place an order or apply for bulk purchase discounts?
A4: Send your required order quantity via email to Irene8866@163.com, or leave us a message on WhatsApp (+86 18950163907). We will reply within 24 hours with formal quotation and stock confirmation.
For more product information, please contact our professional sales team to obtain the latest pricing and stock information for the BECKHOFF EL4004!
Hot Tags: beckhoff el4004 4-channel independent 0~10v analog output ethercat terminal, China beckhoff el4004 4-channel independent 0~10v analog output ethercat terminal manufacturers, suppliers, factory, BECKHOFF EK1100 Bus Coupler, BECKHOFF EL1904 Safety Input Module, BECKHOFF EP2328 0002, BECKHOFF EP2328 0002 EtherCAT Terminal Box, EtherCAT Terminal Box, KL1418
